The security plugin supports user authentication through SAML single sign-on. The security plugin implements the web browser SSO profile of the SAML 2.0 protocol.
This profile is meant for use with web browsers. It is not a general-purpose way of authenticating users against the security plugin, so its primary use case is to support Kibana single sign-on.
We provide a fully functional example that can help you understand how to use SAML with Kibana.
- Download and unzip the example ZIP file.
- At the command line, run
Review the files:
docker-compose.ymldefines two ODFE nodes, a Kibana server, and a SAML server.
custom-kibana.ymladd a few SAML settings to the default
config.ymlconfigures SAML for authentication.
Access Kibana at http://localhost:5601. Note that Kibana immediately redirects you to the SAML login page.
Log in as
adminwith a password of
After logging in, note that your user in the upper-right is
SAMLAdmin, as defined in
/var/www/simplesamlphp/config/authsources.phpof the SAML server.
If you want to examine the SAML server, run
docker psto find its container ID and then
docker exec -it <container-id> /bin/bash.
In particular, you might find it helpful to review the contents of the
To use SAML for authentication, you need to configure a respective authentication domain in the
authc section of
plugins/opendistro_security/securityconfig/config.yml. Because SAML works solely on the HTTP layer, you do not need any
authentication_backend and can set it to
noop. Place all SAML-specific configuration options in this chapter in the
config section of the SAML HTTP authenticator:
authc: saml_auth_domain: http_enabled: true transport_enabled: false order: 1 http_authenticator: type: saml challenge: true config: idp: metadata_file: okta.xml ... authentication_backend: type: noop
After you have configured SAML in
config.yml, you must also activate it in Kibana.
Running multiple authentication domains
We recommend adding at least one other authentication domain, such as LDAP or the internal user database, to support API access to Elasticsearch without SAML. For Kibana and the internal Kibana server user, you also must add another authentication domain that supports basic authentication. This authentication domain should be placed first in the chain, and the
challenge flag must be set to
authc: basic_internal_auth_domain: http_enabled: true transport_enabled: true order: 0 http_authenticator: type: basic challenge: false authentication_backend: type: internal saml_auth_domain: http_enabled: true transport_enabled: false order: 1 http_authenticator: type: saml challenge: true config: ... authentication_backend: type: noop
Identity provider metadata
A SAML identity provider (IdP) provides a SAML 2.0 metadata file describing the IdP’s capabilities and configuration. The security plugin can read IdP metadata either from a URL or a file. The choice that you make depends on your IdP and your preferences. The SAML 2.0 metadata file is required.
| ||The path to the SAML 2.0 metadata file of your IdP. Place the metadata file in the |
| ||The SAML 2.0 metadata URL of your IdP. Required if |
IdP and service provider entity ID
An entity ID is a globally unique name for a SAML entity, either an IdP or a service provider (SP). The IdP entity ID is usually provided by your IdP. The SP entity ID is the name of the configured application or client in your IdP. We recommend adding a new application for Kibana and using the URL of your Kibana installation as the SP entity ID.
| ||The entity ID of your IdP. Required.|
| ||The entity ID of the service provider. Required.|
The Web Browser SSO Profile exchanges information through HTTP GET or POST. For example, after you log in to your IdP, it sends an HTTP POST back to Kibana containing the SAML response. You must configure the base URL of your Kibana installation where the HTTP requests are being sent to.
| ||The Kibana base URL. Required.|
Username and Role attributes
Subjects (for example, user names) are usually stored in the
NameID element of a SAML response:
<saml2:Subject> <saml2:NameID>admin</saml2:NameID> ... </saml2:Subject>
If your IdP is compliant with the SAML 2.0 specification, you do not need to set anything special. If your IdP uses a different element name, you can also specify its name explicitly.
Role attributes are optional. However, most IdPs can be configured to add roles in the SAML assertions as well. If present, you can use these roles in your role mappings:
<saml2:Attribute Name='Role'> <saml2:AttributeValue >Everyone</saml2:AttributeValue> <saml2:AttributeValue >Admins</saml2:AttributeValue> </saml2:Attribute>
If you want to extract roles from the SAML response, you need to specify the element name that contains the roles.
| ||The attribute in the SAML response where the subject is stored. Optional. If not configured, the |
| ||The attribute in the SAML response where the roles are stored. Optional. If not configured, no roles are used.|
Requests from the security plugin to the IdP can optionally be signed. Use the following settings to configure request signing.
| ||The private key used to sign the requests or to decode encrypted assertions. Optional. Cannot be used when |
| ||The password of the private key, if any.|
| ||Path to the private key. The file must be placed under the Open Distro for Elasticsearch |
| ||The algorithm used to sign the requests. See the next table for possible values.|
The security plugin supports the following signature algorithms.
Usually, IdPs provide information about their individual logout URL in their SAML 2.0 metadata. If this is the case, the security plugin uses them to render the correct logout link in Kibana. If your IdP does not support an explicit logout, you can force a re-login when the user visits Kibana again.
| ||Force a re-login even if the user has an active session with the IdP.|
Currently, the security plugin supports only the
HTTP-Redirect logout binding. Make sure this is configured correctly in your IdP.
Exchange key settings
SAML, unlike other protocols, is not meant to be used for exchanging user credentials with each request. The security plugin trades the SAML response for a lightweight JSON web token that stores the validated user attributes. This token is signed by an exchange key that you can choose freely. Note that when you change this key, all tokens signed with it become invalid immediately.
| ||The key to sign the token. The algorithm is HMAC256, so it should have at least 32 characters.|
If you are loading the IdP metadata from a URL, we recommend that you use SSL/TLS. If you use an external IdP like Okta or Auth0 that uses a trusted certificate, you usually do not need to configure anything. If you host the IdP yourself and use your own root CA, you can customize the TLS settings as follows. These settings are used only for loading SAML metadata over HTTPS.
| ||Whether to enable the custom TLS configuration. Default is false (JDK settings are used).|
| ||Whether to verify the hostnames of the server’s TLS certificate.|
authc: saml_auth_domain: http_enabled: true transport_enabled: false order: 1 http_authenticator: type: saml challenge: true config: idp: enable_ssl: true verify_hostnames: true ... authentication_backend: type: noop
Configure the root CA used for validating the IdP TLS certificate by setting one of the following configuration options:
config: idp: pemtrustedcas_filepath: path/to/trusted_cas.pem
config: idp: pemtrustedcas_content: |- MIID/jCCAuagAwIBAgIBATANBgkqhkiG9w0BAQUFADCBjzETMBEGCgmSJomT8ixk ARkWA2NvbTEXMBUGCgmSJomT8ixkARkWB2V4YW1wbGUxGTAXBgNVBAoMEEV4YW1w bGUgQ29tIEluYy4xITAfBgNVBAsMGEV4YW1wbGUgQ29tIEluYy4gUm9vdCBDQTEh ...
| ||Path to the PEM file containing the root CAs of your IdP. The files must be placed under the Open Distro for Elasticsearch |
| ||The root CA content of your IdP server. Cannot be used when |
The security plugin can use TLS client authentication when fetching the IdP metadata. If enabled, the security plugin sends a TLS client certificate to the IdP for each metadata request. Use the following keys to configure client authentication.
| ||Whether to send a client certificate to the IdP server. Default is false.|
| ||Path to the PEM file containing the client certificate. The file must be placed under the Open Distro for Elasticsearch |
| ||The content of the client certificate. Cannot be used when |
| ||Path to the private key of the client certificate. The file must be placed under the Open Distro for Elasticsearch |
| ||The content of the private key of your certificate. Cannot be used when |
| ||The password of your private key, if any.|
Enabled ciphers and protocols
You can limit the allowed ciphers and TLS protocols for the IdP connection. For example, you can only enable strong ciphers and limit the TLS versions to the most recent ones.
| ||Array of enabled TLS ciphers. Only the Java format is supported.|
| ||Array of enabled TLS protocols. Only the Java format is supported.|
Minimal configuration example
The following example shows the minimal configuration:
authc: saml_auth_domain: http_enabled: true transport_enabled: false order: 1 http_authenticator: type: saml challenge: true config: idp: metadata_file: metadata.xml entity_id: http://idp.example.com/ sp: entity_id: https://kibana.example.com kibana_url: https://kibana.example.com:5601/ roles_key: Role exchange_key: 'peuvgOLrjzuhXf ...' authentication_backend: type: noop
Because most of the SAML-specific configuration is done in the security plugin, just activate SAML in your
kibana.yml by adding the following:
In addition, the Kibana endpoint for validating the SAML assertions must be whitelisted:
If you use the logout POST binding, you also need to whitelist the logout endpoint:
server.xsrf.whitelist: ["/_opendistro/_security/saml/acs", "/_opendistro/_security/saml/logout"]
To use IdP-initiated SSO, set the Assertion Consumer Service endpoint of your IdP to this:
Then add this endpoint to
server.xsrf.whitelist: ["/_opendistro/_security/saml/acs/idpinitiated", "/_opendistro/_security/saml/acs", "/_opendistro/_security/saml/logout"]